Yaesu FTM-100DE

https://simonthewizard.files.wordpress.com/2015/05/yaesu-ftm-100de-144430mhz.jpgThe Yaesu FTM-100DE is a two band radio for 144/430 MHz which supports the new C4FM/FDMA digital mode.

The FTM-100DE enhances the range of products by Yaesu which follow the 'System Fusion' strategy. The mobile transceivers offers support for operation in FM (analog) and C4FM (digital) and thus eases the transition from analog to digital radio systems. Of course the "automatic mode switching" (AMS) system by Yaesu is used with the transceiver as well. This feature automatically switches from FM to C4FM on reception of either signal, making it much simpler to operate with repeaters which support both modes. On transmit either the last heard or a fixed mode (FM, C4FM) is used.

Optically the most promionent feature is the bright and easy to read, monochrome (white) LC display. With a 160x40 dot matrix display and two coloured indicators the current operation status is always easily visible. The colour indicators show FM or C4FM reception (green, blue) or transmission (red). The graphical display is really helpful when navigating the menu system. The FTM-100DE supports 500 memories per VFO (A/B), of course each memory can be named and the name can be displayed instead of the frequency. In contrast to larger transceivers the FTM-100DE supports only one receiver, so only one signal can be received at any given time. A dual watch feature allows to constantly monitor a second frequency and switch to that frequency on activity (SQL).

A GPS antenna required for navigation and APRS functions is already installed in the front panel. This let's you start with APRS operation right away, whether analog or digitally. The FTM-100DE supports all known and required functions for standard APRS, this allows an easy interoperation with established systems worldwide. Various display modes show direction and distance to a remote APRS station or offer a list view of APRS stations. Of course the APRS message servicec and functions like SmartBeaconing are supported as well.

Despite the small size of the Yaesu FTM-100DE (140x45x160mm), the radio offers full 50W transmit power on 2m and 70cm. A diplexer is built in, so a dual-band antenna can be directly connected. A slot for microSD memory cards is available, it serves as a storage for memory channels, received digital data (images) etc. Please note that the camera microphone MH-85A11U can not be used with this transceiver. Included in shipment is a 3m long separation cable for the display unit, optionally a 6m cable is available. Another option is the Bluetooth unit BU-2 which allows hands-free operation with a suitable BT headset. Anther option for the FTM-100DE is the FVS-2, a voice memory and avoice announcement unit for voice supported operation of the radio. With the optional HRI-200 interface the operation of the "Wires-X" mode over the internet is possible, for an extended explanation of the many functions please see the System Fusion brochure below. A wide band receiver nicely completes the capabilities of this mobile transceiver by Yaesu.

The first devices are expected in September 2015.

Order No.
FTM-100DE Yaesu FTM-100DE C4FM FDMA VHF/UHF Mobile Transceiver  
MH-48A6J DTMF microphone (as supplied)  
BU-2 Bluetooth Adapter Unit  
BH-1A Bluetooth Headset  
CD-40 Charging Cradle for BH-1/2  
PA-46C Power Supply for CD-40 Bel of mail
MLS-200 Waterproof loudspeaker  
FVS-2 Voice Unit  
MMB-98 Suction Cup Holder for display unit  
CT-162 Separation cable 6m  
CT-163 Data cable, serial data  
CT-167 Data cable, 10-pin connector/open ended  

Download: FTM-100DE Brochure (PDF, EN, 2.7MB)
Download: Datasheet and information about YAESU C4FM/FDMA Digital Mode (PDF, EN, 3MB)
 

Memory screen
Group Monitor
Group Monitor
GPS
APRS

 

HRI-200 Internet Link Adapter

http://www.hamradio.com/images_manuf/H0-013628A.jpgWith the HRI-200 the Yaesu C4FM-Devices like the FTM-400 or the DR-1 can be connected to the internet. The required software and the device cables are in included. The HRI-200 can control 2 Transceiver at the same time and watch on 4 frequencies.
The HRI-200 interface supports the full functionality of Wires-X as the networking of the Group Monitor, Local Info, emergency ...
Even on older devices, the HRI-200 can be used. Here the interface is then operated only in FM mode and controlled via DTMF. The features are significantly limited.

The connection between the HRI-200 and a computer is performed only by the supplied USB cable. An additional power supply, etc. is not necessary. The necessary router configuration, the software can make by UPnP in the router itself. 

Order No.
HRI-200 Yaesu Internet Linking Adapter Bel of mail

 

Desktop case for mobile transceivers, including fan

Desktop Case with cooling for various mobile transceivers.

http://www.randl.com/shop/catalog/images/dataimages/yaesu/smb201.jpg
SMB-201
(radio not included)

Sometimes even the best equipment can get hot, for example when used in tropical zones or in certain industrial environments. Or you need a fixed place for the mobile transceiver... This is where the desktop case SMB-201 by Yaesu really shines!

The desktop case SMB-201 by Yaesu act as a support and case for various mobile transceivers. Below the radio sits a fan unit to provide cooling, even when the case is installed in narrow spaces with less than perfect ventilation. The SMB-201 includes it#s own power supply (SAD-11C, included). The radio is installed with 4 screws into the case, usually the speaker points upwards and is not blocked.

The SMB-201 fit's perfectly for Yaesu radios like the FTM-400D, FT-8900, FT-8800 and FT-7900. Other radios, even from other manufacturers, can be made to fit by using custum made spacers or adaptor plates. Size approx. 146 x 100 x 87mm, weight approx. 700g.

Order No.
SMB-201 Yaesu Desktop Case with Fan unit Bel of mail

Alle prijzen zijn inclusief BTW., maar exclusief verzendkosten.
Tussentijdse prijswijzigingen en typefouten voorbehouden.
Fabrikanten kunnen specificaties en uitvoeringen wijzigen.