AOR AR-DV1 Digital Voice Receiver’s the FIRST multi-mode digital voice receiver to receive and decode virtually ALL popular digital modes including: MOTOTRBO(tm), DMR, dPMR(tm), APCO P25 Phase I, NXDN(tm), Icom D-Star(tm), Digital CR, Yaesu, Kenwood®, and Alinco EJ-47U as well as conventional analog signals.

With this breakthrough development, AOR offers the monitoring community a powerful new tool that receives multiple digital formats in addition to traditional analog operations in a compact receiver built for high sensitivity and selectivity.

The AOR AR-DV1B wideband communications receiver covers 100 kHz to 1300 MHz (less cellular on U.S. consumer "B" version) in traditional analog modes (SSB, CW, AM, FM, S-FM, W-FM) as well as various digital modes. In fact, we know of no other radio in this category that can decode Icom's D-Star mode, Yaesu's new C4FM mode, Alinco's digital mode, NXDN, P25 Phase1, etc.

Main Features

Receiver System

See PDF Brochure
Firmware Update (June 2015)

Order No.
AOR AR-DV1 Bel/mail



AOR ARD-300 Multi-Mode Decoder

The ARD300 decodes APCO P25 voice signals as well as dPMR, NXDN, Icom D-Star, Digital CR, Yaesu, Kenwood and Alinco EJ-47U digital signals. It also improves the readability of existing analog narrowband FM signals.  The ARD300 Multi-Mode Decoder is designed to convert digital voice signals into conventional audio and works with existing receivers having a 10.7 MHz or 45.05 MHz IF output.

The ARD300 can be used with AOR ‘legacy” receivers such as the AR8600 MK2, AR5000(A/+3) and newer models such as the AR2300, AR5001D, AR6000 and with factory modification, the AR8200MK3 hand-held receiver. It is also usable with many other manufacturer’s receivers that have a wide-band IF output of 10.7 MHz or 45.05 MHz, however, AOR limits support of the ARD300 for use with AOR receivers.

The ARD300 uses the higher bandwidth of the IF signal and converts the digital signals, making them audible through an internal or optional external speaker

Type: Digital voice multi-decoder
Supported modulations
and vocoders:
Yaesu C4FM AMBE+2 (Digital Wide Mode not supported)
Digital CR C4FM AMBE+2 (Japanese DCR standard, 351 MHz)
NXDN C4FM AMBE+2 (Only 6.25 KHz mode supported)
dPMR C4FM AMBE+2 (Only Tier 1 supported)
APCO P25 C4FM IMBE (Phase 1)
IF input: 10.7 MHz or 45.05 MHz, ~50 ohms
Voltage: 10.7-16 VDC
Current drain: Max 300 mA
Dimensions (W*H*D): 103*45*180 mm (4.05*1.77*7.09")
Weight: gr (? lbs)
Manufactured: Japan, 2013-201x
Other: Built-in speaker: 700 mW @ 8 ohms
Indicated price is in the range of $800 (US)


Order No.
AOR ARD-300 759.00


AOR SR-2200 DSP powered VHF/UHF receiver

The AOR SR2200 is a DSP powered VHF/UHF receiver unit covering from 25 MHz to 3 GHz with triple conversion superheterodyne in AM, NFM, WFM and SFM modes. Thanks to a well designed RFU, the generated IF signal of 10.7 MHz is of high linearity. Moreover, the demodulated signal is amplified to a high-definition audio (AF) signal, which can be output to an external speaker (not supplied) for superb sound. The rear panel features both an RS232 port and USB port. The 8 conductor Accessory Output jack contains:  Discriminator Out 5VDC @30mA Max., AF out 120mV 600 ohms, AF out 60mV 600 ohms and 5VDC @30ma Max and ground. The supplied SR2200 CD includes the manual, simple control software and drivers. A DC power cord is provided. This device requires 12 VDC at 500 ma.



Order No.
SR-2200 Bel of mail


AOR AR-ONE wideband communications receiver

The AOR AR-ONE is a professional wideband communications receiver covering 10 kHz to 3.3 GHz in AM, FM, NFM, WFM, LSB, USB, CW and DATA modes. It provides laboratory grade stability of 0.1 PPM 14° ~ 122°F (-10° ~ 50°C) and 1 Hz frequency display. It is optimized for surveillance and monitoring applications. The AR-ONE is designed for computer controlled operation and up to 99 receivers can be controlled by a single PC. (Software not supplied). Other advance features include:  ten VFOs and 1000 memories (10x100), attenuator and preamp. Scan and search with pass and delay are fully supported. Many parameters are settable via the configuration menu and using the arrow keys. The rear panel features two RS232 ports, multi-IF outputs (455 kHz and 10.7 MHz) and N type antenna input jack. The compact size of this radio is conducive to mobile or fixed applications. Includes Owner's Manual, 120 AC 60 Hz power supply and DC power cord.

 Click here to view color brochure [PDF 166k].

Order No.
AOR AR-ONE Bel of mail


AOR AR-8600 Mark IIB extremely versatile receiver

The AOR AR8600 Mark IIB is an extremely versatile receiver which can be used virtually anywhere, mobile, base or trans-portable ... powered from an external 12 VDC power supply, optional d.c. lead from a 12 VDC vehicle or from an optional internally fitted BP8600 NiCad battery pack. Like the original AR8600, it features a strong twin metal case with diecast front panel characterizes the multi-purpose role. All mode receive capability is provided including Single Side Band with programmable tuning steps down to a resolution of 50 Hz with the frequency established by a highly accurate Temperature Compensated Crystal Oscillator (TCXO). An RS232 port further extends the capabilities with free supporting control software available from the AOR web sites.

Center stage is a custom multi-section back-lit LCD, numeric keypad, navigation keys, rotary tuning control and separate controls for volume and squelch control, the LCD can also display alpha-numeric text comments. The chassis is manufactured from two metal compartments, effectively a metal chassis inside a metal cabinet this provides excellent screening characteristics and great robustness highlighting its multi application role. The front panel is also manufactured from die-cast aluminium.

Step may be programmed by the operator in any receive mode using multiples of 50 Hz in any mode (i.e. 5 kHz, 12.5 kHz or even 1.25 kHz). Extensive step-adjust and frequency offset facilities are also provided to ensure tracking of the most obscure band plans, AFC (Automatic Frequency Control) is included for spot on tuning ensuring that nothing is missed. A wide frequency coverage is available from 530 kHz to 3000 MHz (less cellular) with actual minimum acceptable frequency of 100 kHz. All mode receive: WFM, NFM, SFM (Super Narrow FM), WAM, AM, NAM (Wide, standard, Narrow AM), USB, LSB & CW. A 3.0 kHz SSB filter is employed with true carrier re-insertion resulting in non-offset frequency readout for easy tuning of SSB transmissions. An attenuator and noise limiter are also featured. A supplied AM BCB antenna may be plugged into the rear panel. This radio has an adjustable sleep timer with a range of 1 to 120 minutes (in 1 second increments).

Computer control is available via a standard 9-pin RS232 D-type connector on the rear chassis, just a standard RS232 cable is required for connection to a PC, the extensive RS232 command set is printed in the operating manual along with many pages of explanatory notes. A free software package will be available as a download from the AOR web sites, this provides frequency control & management, searching, scanning, logging with support for geographic data from a GPS and audio recording to disk. In addition, optional internal slot cards, which fit into the rear chassis of the AR8600, extend the capabilities even further, five cards may be fitted, with two operational simultaneously. The slot cards are common to the AR8600, AR8200 and AR8200Mark2. Installation is $30.00 per option at time of receiver purchase. Please note that only one of these three internal options may be installed at once:  P25-8600, BP8600 or TV8600. (Shop installation of options is suggested). The AR8600 comes with an AA8600 AC power supply, RA8600 Telescopic Whip antenna, medium wave (AM) plug-in antenna and very detailed Owner's Manual.

Improvements over the original AR8600 include:
Expanded frequency coverage, dimmer on/off function, improved RF front end, better audio response and ability to accept the TV-8600 video unit.

Order No.
AOR AR-8600 Mark IIB Bel of mail


AOR AR-5001B wideband communications receiver
The AOR AR5001DB wideband communications receiver covers 40 kHz to 3150 MHz (less cellular) in:  USB, LSB, CW, Wide FM, Narrow FM, AM and AM Synchronous modes. APCO P-25 mode is available optionally. 2000 Alpha memories store frequency, mode, step, de-emphasis, AGC mode, CTCSS, DCS, auto notch, antenna port and attenuator settings. Bandwidths are:   200 Hz, 500 Hz, 3 kHz, 6 kHz, 15 kHz, 30 kHz, 100 kHz, 200 kHz and 300 kHz (-3 dB). There are two dual frequency modes. In the dual offset mode you can listen to two frequencies in the same band (± 5 MHz). In the regular dual frequency mode you can listen to a VHF/UHF frequency and an HF frequency, even if different modes. The special tri-frequency mode allows HF reception combined with the dual offset mode!

This radio features five VFOs, DTMF tone decode, CW pitch control, Auto notch, noise reduction, noise blanker, keypad entry, a precision signal meter and SD card port. It also has a high resolution spectrum display function. The AR5001D comes with well filtered DC supply, manual and SD card. We had an opportunity to test-drive the new AR5001D here at Universal on June 15, 2010 and we were most impressed!


Order No.
AOR AR-5001B Bel of mail


AOR AR-6000 wideband communications receiver


The AOR AR6000 wideband communications receiver covers 40 kHz to 6000 MHz continuousely in:  USB, LSB, CW, Wide FM, Narrow FM, AM and AM Synchronous modes. APCO P-25 mode is available optionally. 2000 Alpha memories store frequency, mode, step, de-emphasis, AGC mode, CTCSS, DCS, auto notch, antenna port and attenuator settings. Bandwidths are:   200 Hz, 500 Hz, 3 kHz, 6 kHz, 15 kHz, 30 kHz, 100 kHz, 200 kHz and 300 kHz (-3 dB).






Order No.
AOR AR-6000 Bel of mail



The AOR AR-Alpha B takes professional monitoring to a new level. It is designed to meet the increasingly complex needs of monitoring professionals. Continuous coverage from 10 kHz to 3.3 GHz (less cellular frequencies). Digital signal processing is employed at both the IF stage and demodulating stage. Fast frequency processing is achieved by means of FFT. Dual communications ports on the back panel support both RS-232C and USB connection. Modes of reception include:  WFM (in stereo selectable de-emphasis), NFM, AM (Synchronous AM, diversity synchronous AM), ISB, RZSSB, USB, LSB, CW, P25, Video (FM, AM NTSC/PAL). A wide range of IF filters are available:  200 Hz, 500 Hz, 3 kHz, 6 kHz, 15 kHz, 30 kHz, 100 kHz, 200 kHz, 300 kHz. The AGC may be set for FAST, MEDIUM, SLOW and OFF. A stunning 6 inch diagonal high resolution TFT color display supports spectral display (with water fall) as well as video reception [no broadcast TV after 02/17/09]. The spectrum display can show up to 1 GHz of bandwidth! This 19 inch wide radio can be employed in both base and field environments. The Alpha requires 13.8VDC at 2.5 amps. The back panel features two antenna inputs:  ANT 1 (N), ANT 2 (SO239). There is 10.7MHz (BNC) output jack. Other jacks include:  AF Out Right and Left (RCA), Mute (RCA), External Speaker (3.5mm mini) and Accs. 2. The Alpha comes with rack ears for mounting the radio in a standard 19 inch rack. With 129 page manual.


Order No.
AOR ALPHA Bel of mail



The AOR AR-Mini B handheld radio covers 100 kHz to 1300 MHz (less cellular) in:  Wide FM, Narrow FM and AM modes. 1000 Alpha memories in 10 banks are supplied. Bandwidths are:   FM-N/AM 15 kHz, FM-Wide 220 kHz (-6 dB). 2.4 x 3.7 x 0.9 inches 7.4 oz. SMA type antenna.

The AR-Mini comes with two NiMH AA cells, AC adapter, SMA flexible antenna, belt clip, hand strap and manual.
The blocked consumer version is discontinued. The unblocked government version is till available for qualified users.

* Water Resistant (to JIS4 standard)
* High Stability TCXO
* Long Battery Life (up to 22 hours)
* 1000 Memories
* CTCSS & DCS Decode
* Preprogrammed Bug Detector
* Two VFOs
* RF Attenuator
* Built-in Ferrite Bar Antenna (100-5000 kHz)
* Battery Saver
* Backlit LCD with Signal Meter
* Voice Descrambling (AR-Mini U version only).


Order No.
AOR-MINI Bel of mail


AOR AR-8200MK3

The AOR AR8200 Mark III B (Series-3) is yet a further upgraded version of an already outstanding earlier AR8200 and AR8200 Mark II, wideband receiver. This sensitive handheld radio covers 500 kHz to 3000 MHz (less cellular) in:  Wide FM, Narrow FM, Super Narrow FM, Wide AM, Standard AM, Narrow AM, USB, LSB and CW. The side keypad has 4 arrow keys presented as a single rocker. 1000 Alpha memories in 20 banks are supplied. The scan-search rate is 37 steps/second. Bandwidths are:  FM-W 150 kHz, FM-N/AM-W 12 kHz, AM/FM-S 9 kHz and AM-N/SSB 3 kHz (-6 dB).

Improvements in the Mark II version include:
* A new TCXO for greater stability
* Brighter backlit display
* New telescopic antenna
* New keyboard
* Attractive black case
* Stronger 1100 mAh high capacity Ni-Cd cells.
Improvements in the Mark III version include:
* Extended frequency coverage
* Better sensitivity with increased resistance to intermod
* Improved temperature compensated crystal oscillator
* Stronger 1500 mAh high capacity Ni-MH cells.

The AR8200 Series-3 includes:  Four NiMH 1500 mAh AA cells, AC charger, belt-clip, auto cigarette lighter power cord, removable medium wave (AM) antenna and RA8600 Telescopic Whip antenna. This radio may also be operated from a 12 VDC external source. There is a 1/8 inch (3.5mm) mini earphone jack on the right side.

The AR8200 series accept plug-in slot card options (see below). The AR8200 MkIIIB establishes a new standard in wideband portable radios. Only 2.4 x 6 x 1.5 inches (61x143x39mm).

Click here to view color spec sheet [PDF 146K].

Order No.
AOR AR8200 Mark III B Bel of mail

Alle prijzen zijn inclusief BTW., maar exclusief verzendkosten.
Tussentijdse prijswijzigingen en typefouten voorbehouden.
Fabrikanten kunnen specificaties en uitvoeringen wijzigen.