ICOM IC-M802 MF/HF Marine Transceiver

MF/HF Marine Transceiver
The latest ICOM Digital Signal Processor technology
with a compact remote head.

Professional design.
The IC-M802 has a professional design.
(2) Position exchange with external GPS receiver.
When connected to an external GPS receiver*, position information can be exchanged with other stations.
When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA 0183 output and RS-232C interface are required.
** Position mapping software required. (Not supplied by Icom)

Standard 4×8 remote controller.
The IC-M802 offers an industry standard 4-inch tall ( 10,16cm) remote controller When set up with the IC-M503 VHF radio, Icom offers you a complete communication station.

Large LCD with dot matrix characters.
You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels ( plus OFF) adjustable backlit display and keypad.

Easy to use in all conditions.
The IC-M802 offers two large dails – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for for ITU channels are available.

Built-in Digital Selective Calling (DSC).
For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation.

Digital signal processor advantage.
The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like E-mail, SITOR, FSK and other operation without an optional filter.

150W (PEP) of powerful output.
150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power – very important for data communication, like e-mail.

One-touch e-mail* access.
An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier. * For HF e-mail, an HF modem, PC and cables are required.

Automatic antenna tuner, AT-140.
An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD.

Other features.

Order No.
ICM802HF   Bel of mail

Alle prijzen zijn inclusief BTW., maar exclusief verzendkosten.
Tussentijdse prijswijzigingen en typefouten voorbehouden.
Fabrikanten kunnen specificaties en uitvoeringen wijzigen.